How to bring up new Apollo Lake platform?
Hi , I am trying to bring up a new Apollo Lake-based platform with a coreboot+SeaBIOS combination - it is very similar to the Leaf Hill CRB so I adapted my platform code using the Leaf Hill project as...
View ArticleClik here to view.
Windows 10 hangs/freezes on Bay Trail Celeron N2930
CPU: Intel Celeron N2930 (BayTrail)OS: Windows 10 IoT Enterprise LTSB 2016 (version 1607)NIC: 2 x Intel i210 onboard We have encountered a serious intermittent problem with the above configuration....
View ArticleDisable Thermal Management atom e620T
Hallo together, i would like to disable the thermal management of the atom e620T The Thermal Management is supported through therminal monitor and therminal monitor 2 in the atom processor. We use a...
View ArticleeepromARMtool
Where do I find the eepromARMtool code? I am working on an ARM based design that uses an i210. I would like to program the NVM via this tool so that I can get the driver to load. Regards,Matt
View ArticleClik here to view.
Using the I210 with IMX-8
Hi, I have connected the i210 to the IMX-8 using a PCIe and an I2C interfaces. What tools should I use to program the NVM? Noam
View ArticleApollo Lake-I ROM Bypass
Hi, I have some questions regarding enabling/using the ROM Bypass for an Apollo Lake-I (E3900) processor.How can the ROM bypass be enabled in the FIT tool? The setting is greyed out, and when the image...
View ArticleOscillator on Atom Processor not starting...
We have designed an SBC ("Vision PCB") with the Atom (PN FJ8066401836620) (Z Series). We are targeting this PCB as a replacement (form factor reduction) for an existing PCB we have. We are debugging...
View ArticleX550-AT2 VCCA pins
The Pin Interface section of the Intel® Ethernet Controller X550 Datasheet lists VCCA pins as 1.0V power pins. Except from this, the pins are not mentioned at all in the document. The...
View ArticlePMC feature bits (Intel Flash Image Tool)
Hi Guys, Does anyone know what "PMC feature bits" is about? "PMC Feature enable bits."MISC_PMC_ENABLE.FUNC_DIS_RTC_SAVE_ENABLEvalue_list="DISABLE_FUNC_DIS_RTC_SAVE,,ENABLE_FUNC_DIS_RTC_SAVE" Why it...
View ArticleLanconf NVM Image Firmware version
HiCould you please explain the difference between theFirmware Version and the NVM Version (ETRACK) fields in the NVM Image section of lanconf. The reason I am asking is I just updated an i210 device...
View ArticleCNDA Request
Dear Sir/Madam I am working in a company, where I am planning to do a Mobile platform, where I want to use Intel processors(Intel Pentium N- and J- series). My company does not have an CNDA...
View Article21.5-inch FHD 10-point Multi-touch Panel Computer
Axiomtek's GOT321W-502-PCT is a 21.5-inch multi-touch widescreen panel computer, powered by the LGA1151 socket 7th/6th generation Intel® Core™ i7/i5/i3, Celeron® or Pentium® processor with the Intel®...
View ArticleXL710 on ARM64 architecture
Hello, I started to work on our new GPON embedded platform. HW is not available yet, but I want to be prepared. The board will have a Freescale's Layerscape processor LS2088 with 8 ARM64 cores. It will...
View ArticleClik here to view.
X557-AT MDIO/MDC question on 10GBase-KR to 10GBase-T operation
Hi, We plan to use X557-AT for conversion of 10GBase-KR to 10GBase-T. The switch card below that produces 10GBase-KR does not have MDIO/MDC I/O exposed to connect to X557-AT. We have few questions on...
View ArticleBroadwell-DE GPIO have support legacy interrupt ?
Intel Broadwell-DE GPIO have support legacy interrupt ?if not , how can we use it for interrupt source by external devices. Thanks.
View ArticleClik here to view.
eeupdateARMTool
Hi Intel Team,Could you please provide us eeupdate ARM tool to flash i210 available in our ARM64 SoCPlease send to kiruthika.varadarajan@harman.com
View ArticleEepromARMtool and to LANConf for ARM platform - source code
Dear all, We are integrating 82574 controller in out ARM based platform. For this chip configuration we need EepromARMtool and to LANConf tools as source scode so we can compile them and run on desired...
View ArticleX540 SPD Pins
I am using the X540-BT2 Ethernet controller in my design and I have a question regarding the SDP (software defined pins) pins.The X540 reference schematic does not tie these pins high or low.The X540...
View ArticleUsing Coreboot/UBoot with Intel Xeon D
We've a board that uses Intel Xeon D. Currently, we're getting a BIOS for this CPU board from a third party vendor. Is it possible/easy to replace the BIOS with Coreboot then go to UBOOT? Is such a...
View ArticleEmbedded Board Planner
Hello Guys ! I need help regarding Intel embedded board planner. How to access it. i have this link Embedded Board Planner but when i click on different tools its give error gateway 502. i need...
View Article